长垣产业园区科技文献服务平台

期刊


ISSN1091-0344
刊名Machining Science and Technology
参考译名机械加工科学与技术
收藏年代1998～2023



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023

2021, vol.25, no.1/3 2021, vol.25, no.4/6

题名作者出版年年卷期
An experimental investigation on the effects of combined application of ultrasonic assisted milling (UAM) and minimum quantity lubrication (MQL) on cutting forces and surface roughness of Ti-6AL-4VNamlu, Ramazan Hakki; Sadigh, Bahram Lotfi; Kilic, Sadik Engin20212021, vol.25, no.4/6
Drilling of titanium alloy (Ti6Al4V) - a reviewYuan, Chua Guang; Pramanik, A.; Basak, A. K.; Prakash, C.; Shankar, S.20212021, vol.25, no.4/6
Sustainable machining of hardened AISI630 stainless steel using thermally enhanced turning techniqueEbrahimi, Seyed Mohammad; Hadad, Mohammadjafar; Araee, Alireza20212021, vol.25, no.4/6
On grinding force ratio, specific energy, G-ratio and residual stress in SQCL assisted grinding using aerosol of MWCNT nanofluidKumar K, Manoj; Ghosh, Amitava20212021, vol.25, no.4/6
Reduced computational time in 3D finite element simulation of high speed milling of 6061-T6 aluminum alloyLi, Guohe; Liu, Meng; Zhao, Shanshan20212021, vol.25, no.4/6
Characterization of machinability of sintered steel foams having different porosities during drilling operationsUllen, Nuray Bekoz20212021, vol.25, no.4/6
Thermomechanical modeling of crystallographic anisotropy effect on machining forces based on crystal plasticity frameworkBen Boubaker, Houssem; Djaka, K. S.; Nouari, M.; Laheurte, P.; Tidu, A.; Moufki, A.20212021, vol.25, no.4/6
Mitigation of cutting point deviation by generating provisional corrugations during milling of thin wallsGopinath, Lakshmanaperumalsamy; Jerome, Savarimuthu; Gopalsamy, Balamurugan20212021, vol.25, no.4/6
Experimental investigation on the performance of composite electrostatic spraying milling using different inner/outer fluid combinationsSu, Yu; Gao, Wenhao; Jiang, Hai; Liu, Zhiqiang20212021, vol.25, no.4/6
Effects of non-electrical parameters on profile accuracies and surface characteristics during wire-EDM of titanium alloyKirwin, Roan M.; Jahan, Muhammad P.20212021, vol.25, no.4/6
1234



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024