长垣产业园区科技文献服务平台

期刊


ISSN1091-0344
刊名Machining Science and Technology
参考译名机械加工科学与技术
收藏年代1998～2023



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023

2017, vol.21, no.1/2 2017, vol.21, no.3/4

题名作者出版年年卷期
Creation of ultrafine-grained surfaces by large strain extrusion machining (LSEM)Moradi, Marzyeh; Basu, Saurabh; Shankar, M. Ravi20172017, vol.21, no.3/4
Simulation of elliptical patterns based on grinding with wheel dressed by elliptical toolIslam, Md Mofizul; Kim, Hochan; Ko, Tae Jo; Bae, Yonghwan20172017, vol.21, no.3/4
Material removal characteristics of full aperture optical polishing processPal, Raj Kumar; Garg, Harry; Karar, Vinod20172017, vol.21, no.3/4
A comparative study on the wear resistance of electrical discharge machined surfacesEkmekci, Bulent; Gungor, Emre20172017, vol.21, no.3/4
On modeling of cutting forces in micro-end milling operationMoges, Tesfaye M.; Desai, K. A.; Rao, P. V. M.20172017, vol.21, no.3/4
Cutting tool wear detection using multiclass logical analysis of dataYacout, Soumaya; Shaban, Yasser; Balazinski, Marek; Jemielniak, Krzysztof20172017, vol.21, no.3/4
Instantaneous uncut chip thickness modeling for micro-end milling processZhang, Xuewei; Yu, Tianbiao; Wang, Wanshan20172017, vol.21, no.3/4
Computational fluid dynamics analysis of MQL spray parameters and its influence on superalloy grindingBalan, Arunachalam Senbagm Setra; Kullarwar, Tejas; Vijayaraghavan, Laxmanan; Krishnamurthy, Ramaligam20172017, vol.21, no.3/4
On the process and mechanics of rotary elastoabrasive finishingSooraj, V. S.20172017, vol.21, no.3/4
Analysis of cutting force coefficients in high-speed ball end milling at varying rotational speedsDikshit, Mithilesh K.; Puri, Asit B.; Maity, Atanu20172017, vol.21, no.3/4
1234



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024