长垣产业园区科技文献服务平台

期刊


ISSN0898-1507
刊名Lasers in engineering
参考译名工程激光
收藏年代2002～2023



全部

2002 2003 2004 2005 2006 2007
2008 2009 2010 2011 2012 2013
2014 2015 2016 2017 2018 2019
2020 2021 2022 2023

2019, vol.42, no.1/3 2019, vol.42, no.4/6 2019, vol.43, no.1/3 2019, vol.43, no.4/6 2019, vol.44, no.1/3 2019, vol.44, no.4/6

题名作者出版年年卷期
Development and Performance Evaluation of a Fast and Accurate Cost-effective Three-Dimensional (3-D) Laser ScannerZong, W-P.; Li, G-Y.; Wang, L.; Li, M-L.; Zhou, Y-L.20192019, vol.42, no.4/6
Microstructure Characteristics and Performance of a Novel Composite Stellite Alloy Fabricated by Laser CladdingWu, G-L.; Ren, F-C.; Zhang, J.; Zhang, Q-L.; Liu, R.; Yao, J-H.20192019, vol.42, no.4/6
Multi-objective Optimization in Laser Trepan Drilling of Inconel-718 Sheet by Using a Genetic Algorithm (GA)Dhaker, K. L.; Pandey, A. K.20192019, vol.42, no.4/6
Nickel-based Gradient Coating on Copper Prepared by the Combination of Laser Alloying and Laser Cladding TechnologiesZhao, J.; Liu, G.; Ma, B.; Zheng, Z-Y.; Jia, L.; Cui, L.20192019, vol.42, no.4/6
Laser Shock Peening (LSP) to Improve the Metallurgical and Mechanical Properties of Gas Tungsten Arc Welding (GTAW) Joints in Hastelloy C-276Manikandan, M.; Reddy, S. A. Nithin Joseph; Prabhakaran, S.; Than, S. Kalaina; Arivazhagan, N.20192019, vol.42, no.4/6
Superficial Stress Reduction by Laser Annealing: Preliminary StudyBarile, C.; Casavola, C.; Pappalettera, G.20192019, vol.42, no.4/6
Influence of Processing Gas Composition on Laser Colouring of Commercially Pure TitaniumKhafaji, N. Y.; Demir, A. G.; Taha, Z. A.; Previtali, B.20192019, vol.42, no.4/6
Laser Hardfacing of Colmonoy-5 (Ni-Cr-Si-B-C) Powder onto 316LN Austenitic Stainless Steel: Effect of Powder Feed Rate on Microstructure, Mechanical Properties and Tribological BehaviorGnanasekaran, S.; Padmanaban, G.; Balasubramanian, V.; Kumar, H.; Albert, S. K.20192019, vol.42, no.4/6
Analysis of the Microcrack Inducing Mechanism Resulting from Graphite Inclusion in the Bond Area and the Influence of Process Parameters for the Laser Repairing of Grey Cast IronYi, P.; Zhan, X-H.; Xiao, P-F.; Liu, Y-C.; Shi, Y-J.20192019, vol.42, no.4/6
Automatic Manufacture of Barcode Rod Tape Using Laser Ablation and Laser InterferometryZhao, M.; Huang, Q-H.; Zhu, L-J.; Qiu, Z-M.20192019, vol.42, no.4/6
12



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024