长垣产业园区科技文献服务平台

期刊


ISSN1059-9495
刊名Journal of Materials Engineering and Performance
参考译名材料工程与特性杂志
收藏年代1998～2023



全部

1998 1999 2000 2001 2002 2003
2004 2005 2006 2007 2008 2009
2010 2011 2012 2013 2014 2015
2016 2017 2018 2019 2020 2021
2022 2023

2001, vol.10, no.1 2001, vol.10, no.2 2001, vol.10, no.3 2001, vol.10, no.4 2001, vol.10, no.5 2001, vol.10, no.6

题名作者出版年年卷期
Hot deformation mechanisms in Ti-5.5Al-1 Fe alloyV. V. Balasubrahmanyam; Y. V. R. K. Prasad20012001, vol.10, no.6
Mechanisms of erosion-corrosion on a cobalt-base alloy and stainless-steel UNS S714400 in aggressive slurriesM. Reyes; A. Neville20012001, vol.10, no.6
On the tensile strength and hardness relation for metalsJoseph Datsko; Laura Hartwig; Brian McClory20012001, vol.10, no.6
The adiabatic correction factor for deformation heating during the uniaxial compression testR. L. Goetz; S. L. Semiatin20012001, vol.10, no.6
Brazeability of the 6061-T6 aluminum alloy with Al-Si-20Cu-based filler metalsL. C. Tsao; T. C. Tsai; C. S. Wu; T. H. Chuang20012001, vol.10, no.6
The erosion-corrosion performance of SA213-T22 steel in low velocity conditionsJ. G. Chacon-Nava; F. H. Stott; A. Martinez-Villafane; F. M. Almeraya-Calderon; J. G. Gonzalez-Podriguez20012001, vol.10, no.6
Creep properties of austenitic stainless-steel weld metalsA. Nassour; W. W. Bose; D. Spinelli20012001, vol.10, no.6
First trial of pulse electric current sintering for high-temperature material Ir{sub}3 NbY. Yamabe-Mitarai; H. Harada20012001, vol.10, no.6
Fracture toughness of superplastic formed/diffusion bonded interfacesY. Xiang; S. Wu; D. Chen20012001, vol.10, no.6
Introduction of compressive residual stresses in Ti-6Al-4V simulated airfoils via laser shock processingM. J. Shepard; P. R. Smith; M. S. Amer20012001, vol.10, no.6
12345678910



国家科技图书文献中心  全球文献资源网  京ICP备05055788号-26  机械工业信息研究院 2018-2024